Omron NX-AD series User Manual Download Page 69

Page: 69 / 290

4 - 5

4 Installation and Wiring

NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)

4-1 Inst

allin

g NX U

1-2 Att

ching Mar

ker

Installation Method

Insert the protrusions on the markers into the marker attachment locations on the NX Units and ter-
minal blocks on NX Units.

Commercially Available Markers

Commercially available markers are made of plastic and can be printed on with a special printer.

To use commercially available markers, purchase the following products.

The markers made by OMRON cannot be printed on with commercially available special printers.

Product name

Model number

Manufactured by Phoenix Contact

Manufactured by Weidmuller

Markers

UC1-TMF8

DEK 5/8

Special marker printer

UM EN BLUEMARK X1

PrintJet PRO

Marker

Marker attachment location

Marker

Marker attachment location

Summary of Contents for NX-AD series



































































































































































































































































































Search results

Summary of Contents for NX-AD series

Reviews:

Related manuals for NX-AD series

Brands by name

Popular brands

Omron NX-AD series, User Manual

Search results

Summary of Contents for NX-AD series

Reviews:

Related manuals for NX-AD series

Brands by name

Popular brands