Omron NX-AD series, User Manual

Page: 153 / 290

7 - 5
7 Analog Output Units
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
7-3
S
p
ecificat
ion
s of
I/O Dat
a
7
7-3
-1 Allocable I/O Dat
a
7-3 Specifications of I/O Data
This section describes the I/O data for the Analog Output Units.
This section describes the allocable I/O data in the Analog Output Unit.
An I/O entry mapping is assigned to the I/O allocation settings for the Analog Output Unit.
A specific I/O entry is assigned to the I/O entry mapping for each NX Unit model. These allocations are
fixed, so you cannot add others or change them.
An I/O entry means the I/O data described in this section. An I/O entry mapping means a collection of
I/O entries.
To assign the I/O allocation information of the NX Unit or Slave Terminal to an NJ/NX-series CPU Unit
or NY-series Industrial PC, use the I/O ports for the allocated I/O data.
However, for Slave Terminals, I/O ports may not be used depending on the type of communications
master or Communications Coupler Unit.
Refer to the user’s manual for the connected Communications Coupler Unit for details on how to use
I/O data for Slave Terminals.
z Two-point Output Units
z Four-point Output Units
7-3-1 Allocable I/O Data
Data name Description
Data
type
Default
value
I/O port
name
Index
Subin-
dex
Ch1 Analog Output
Value Value of analog output
Ch1 INT 0 Ch1 Analog
Output Value 7000 hex 01 hex
Ch2 Analog Output
Value Value of analog output
Ch2 INT 0 Ch2 Analog
Output Value 02 hex
Data name Description
Data
type
Default
value
I/O port
name
Index
Subin-
dex
Ch1 Analog Output
Value Value of analog output
Ch1 INT 0 Ch1 Analog
Output Value 7000 hex 01 hex
Ch2 Analog Output
Value Value of analog output
Ch2 INT 0 Ch2 Analog
Output Value 02 hex
Ch3 Analog Output
Value Value of analog output
Ch3 INT 0 Ch3 Analog
Output Value 03 hex
Ch4 Analog Output
Value Value of analog output
Ch4 INT 0 Ch4 Analog
Output Value 04 hex