![background image](http://html1.mh-extra.com/html/omron/nt20m-series/nt20m-series_operation-manual_743774037.webp)
31
If you select no, then operation will begin without initialization.
When entering RUN Mode after initialization, nothing will be displayed on the
screen and the Terminal will wait for a command from the host.
Caution Screen memory must be initialized before using a new PT. If the PT is used
as shipped from the factory without initialization, messages indicating errors
in the host will not be displayed properly.
3-2-2
Menus
The System Menu is called up by using the system keys during operation.
Transmit Mode
Maintenance Mode
SYSTEM MENU
Quit
Using System Keys
Operation
Content
Press the Buzzer Key, Up Key,
and Down Key simultaneously.
The System Menu shown above is displayed during operation. If actions are executed
while the System Menu is being displayed, the system returns to operation. With the
Buzzer Key pushed down, press the Up Key and Down Key simultaneously.
Press the Up Key.
Moves the bar cursor upward.
Press the Down Key.
Moves the bar cursor downward.
Press the Enter Key.
Selects the menu at the position of the bar cursor.
Quit
Use either of the following two methods to leave the System Menu and return
to operation.
1, 2, 3... 1.
Select “Quit.”
OR
2.
Press the Buzzer Key, Up Key, and Down Key simultaneously.
In addition, if there are no key inputs within 10 s of calling up the System
Menu, the system will automatically return to normal operation.
Selecting Items
To select an item, move the cursor to that item and press the Enter Key.
Selected item
Function
Quit
Quits and return to normal operation.
Transmit Mode
Shifts to Transmit Mode.
Select when transferring data between the PT and Support Tool. For details, refer to 3-3
Transferring Data to and from the Support Tool.
Maintenance Mode
Shifts to Maintenance Mode.
Used to check the setting status of the PT and conducts self-testing.
Initialization
Section 3-1