6
1-4-3
12-key Function Key Units (for DN-type)
Function-key input for NT20M non-touch panel (DN) type models is made
possible by attaching an NT20M-FK210 12-key Function Key Unit.
1-5
Support Tool
Screen data, memory table data, and system data are all created by the Sup-
port Tool. In order to fully utilize the functions of the NT20M and NT2000M
PTs, use a Support Tool version of NT20M-ZASAT-EV4 or higher. Screen
data is interchangeable for NT20M and NT2000M PTs.
NT20M-ZASAT-EV
j
Version
Compatible platform
AT: IBM PC/AT compatible
Floppy disk size
3:
3.5 inch
5:
5.25 inch
S:
3.5 and 5 inch
Support software
NT20M-series, basic model
Overseas specifications (English)
1-6
System Configuration
The Host Interface Unit mounted on the back of the PT is connected to the
host (i.e., a personal computer or Programmable Controller) via communica-
tion cable. The PT must be used with a Host Interface Unit. If no Host Inter-
face Unit is mounted, the PT will not operate. Refer to the NT-series Host
Interface Unit Operation Manual for details on connecting between the Host
Interface Unit and the host.
Using the N600M-LK201 Host Interface Unit, the Programmable Terminal
can be connected one-to-one to a PC through an ASCII Unit, or to personal
computer.
C200H, C500, C1000H,
or C2000H PC
15 m max.
RS-232C
ASCII Unit
RS-232C
15 m max.
NT20M/NT2000M
with NT600M-LK201
Personal computer
NT20M/NT2000M
with NT600M-LK201
RS-232C Interface
(NT600M-LK201)
System Configuration
Section 1-6
