![background image](http://html1.mh-extra.com/html/omron/ns/ns_programming-manual_743537562.webp)
Section 3 Using PTs
3-3 Screen Display and Notification
3-7
NS Series Programming Manual
Using Command Buttons or Multifunction Objects to Close or Move Pop-up
Screens
Pop-up screens can be closed or moved by using
Command
Buttons.
Press a
Command
Button to which
control Pop-up screen
has been set under the button property set-
ting.
Close local pop-up screen:
Closes the current pop-up screen if the Command Button is inside the
pop-up screen.
Close specified pop-up screen:
Closes a specified pop-up screen.
Move local pop-up screen:
Enables the current pop-up screen to be moved if the Command Button is
inside the pop-up screen.
Closing Pop-up Screens when Normal Screens Switched
Pop-up screens can be closed at the same time that the base screen used to open the pop-up screen
is switched to another screen.
Select
Closes when base screen switches
on the Size/Pop-up Tab Page found in the pop-up screen
property setting under
PT – Screen/Sheet properties
.
Summary of Contents for NS -
