![background image](http://html1.mh-extra.com/html/omron/ns/ns_programming-manual_743537003.webp)
Preliminary Material
Introduction
P-1
NS Series Programming Manual
Introduction
Thank you for purchasing an NS-series Programmable Terminal.
NS-series PTs are designed to transfer data and information in FA production sites.
The CX-Designer is a software package that enables creating and maintaining screen data for
OMRON NS-series Programmable Terminals.
Please be sure that you understand the functions and performance of the PT before attempting to use
it. When using an NS-series PT, please also refer to the
NS Series Setup Manual
and the
CX-Designer
Online Help.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
•
Personnel in charge of introducing FA systems into production facilities.
•
Personnel in charge of designing FA systems.
•
Personnel in charge of installing and connecting FA systems.
•
Personnel in charge of managing FA systems and facilities.
Precaution
•
The user must operate the product according to the performance specifications described in the op-
eration manuals.
•
Do not use the PT touch switch input functions for applications where danger to human life or serious
property damage is possible, or for emergency switch applications.
•
Before using the product under conditions which are not described in the manual or applying the
product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion sys-
tems, medical equipment, amusement machines, safety equipment, and other systems, machines
and equipment that may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
•
Make sure that the ratings and performance characteristics of the product are sufficient for the sys-
tems, machines, and equipment, and be sure to provide the systems, machines, and equipment with
double safety mechanisms.
•
This manual provides information for connecting and setting up an NS-series PT. Be sure to read this
manual before attempting to use the PT and keep this manual close at hand for reference during in-
stallation and operation.
OMRON, 2002
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written
permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-quality products, the information contained in this manual is
subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless,
OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained in this publication.
Summary of Contents for NS -
