![background image](http://html1.mh-extra.com/html/omron/ns/ns_programming-manual_743537422.webp)
Section 2 NS Series Functions
2-16 Broken-line Graphs
2-375
NS Series Programming Manual
Line Setting (Broken-line Graph) Dialog Box
Sets the line attributes. Press the
Add Line
and
Set Line
Buttons on the Graph Tab Page to display
the following dialog box.
1
3
4
7
2
8
5
6
No. Setting
Details
1
Start address
Sets the start address referenced for the data.
Maximum and
minimum values
Sets the maximum and minimum values for graph display. If maximum and mini-
mum values are set, the color of the graph lines can be set to change when these
values are exceeded. If
Indirect reference
is set, the maximum and minimum values
can be specified by the contents of an address.
Maximum
Sets the upper limit.
2
Minimum
Sets the lower limit.
3
Line color
Sets the line color (from 256 available colors). The color can be changed depend-
ing on whether or not the set upper and lower limits have been exceeded.
4
Line style
Select from the five line types listed below. Solid line, dotted line, broken line, 1-dot
chain line, or 2-dot chain line
5
Step display
If step display is used, the origin is shown connected by vertical and horizontal
lines.
6
Display offset
Displays the broken-line graph in an offset position, where a specified offset (num-
ber of dots) have been added to the position for the present value
7
Marker
Selects one of the following five markers to be displayed at the peaks.
None,
@
,
, +, or
×
Size
Selects large, middle, or small for marker size.
The sizes are shown below.
Large
Medium Small
Color
Select the marker color (from a choice of 256 colors) under the
Set
Button.
8
Display when
address changes
to ON
When this option is selected, the graph line will be displayed while the specified
communications address is ON.
Summary of Contents for NS -
