Omron KP100L-OD - 12-2010, User Manual

Page: 83 / 125

3 Operation
3 - 20 Grid Connect Photovoltaic Inverter KP100L-OD-  USER’S MANUAL
3-6 Setting in Particular Countries
This section explains a setting different in each country.
 Setting of Italy
This section explains the setting when the country setting is Italy.
Procedure of the Auto Test
Outline
This inverter has an automatic test function which is compliant with ENEL guideline. The function checks each
protective function of OV(Over Voltage), UV(Under Voltage), OF(Over Frequency) and UF(Under Frequency).
Detect level and detect the time are shown on LCD.
Execute the Auto Test in grid-connected condition. If you don’t connect grid and start Auto test, you can not finish
Auto Test.
Grid-connected operation is started automatically after the test. The starting procedures for the Auto Test and
sequences during the test are as follows.
The starting procedures for Auto Test
The Auto Test in the item of the user setting starts by you are selected and executed.
But, the Auto Test will not be started at the following conditions.
• When KP100L breaks down.
• When DC Power of Solar modules has not reached the amount that running is possible
Setup:AutoTest
ENT MODE
Setup:AutoTest
Are you ready?
ENT
AutoTest:
Waiting Blinking the Display [3] *Waiting
Please wait for about two minitues
AutoTest:OV [L1]
230.03V / 270.00V