Omron KP100L-OD - 12-2010, User Manual

Page: 12 / 125

11 Grid Connect Photovoltaic Inverte KP100L-OD-  USER’S MANUAL
Precautions for Correct Use
To prevent the adverse effect on the operation, what is executed or should be evaded is shown below.
 Installation
• Install the product in a regulated direction.
• Do not install the product in the following places.
(1) Locations subject to intense temperature change.
(2) Locations subject to volatile, flammable, corrosive, or other toxic gas.
(3) Locations subject to vibration and large shocks.
(4) Locations subject to water vapor, oil vapor, or condensation.
(5) Locations where the product may be immersed in water.
(6) Locations subject to electric fields, direct sunlight, poor ventilation

(ex. Narrow places where the ventilation would be obstructed or the ambient temperature conditions
would be exceeded.).
(7) Locations subject to temperature and humidity conditions outside of the following ranges
• Temperature:

20 to 60

C
• Humidity: 4 to 100%RH (Without condensation or freezing)
(8) Locations more than 2,000 m above sea level.
(9) Locations subject to saltwater spray, such as on oceangoing vessels or near a seacoast.
(10) Locations subject to falling snow, accumulated snow, or wind-blown snow.

Protect the product by building a protective roof when you install the product in the snowy region.
(11) Locations near highly combustible something or heat sources (stoves, heaters, boilers, etc.
(12) Locations subject to being damaged the wiring by animals or other factors.

Protect the wiring by, for example, placing wiring ducts.
(13) Locations subject to near the equipment (such as a radio or TV) that is likely to be affected by electric
waves, or to near an antenna.

Use the Product
• Do not stand on the product or place any objects on the product.
• Serious human hazard by fire may possibly occur.
• Do not use the product in a flammable gas atmosphere (including flammable sprays such as pesticides).
• Electric shock or fire may occur. Ask an authorized service person or a qualified person with knowledge of
electrical system when you install, add on, move or reinstall the product.