10
Overview of System Startup Procedure
Section 2-1
The Edit Connection Dialog Box will not be closed. If no further connec-
tions are to be set, click the
Close
Button.
The connection will appear in the list of registered devices.
1. Click the
Connections
Tab.
2. Select the device to which a link
is to be established.
3. Click this button to register the
device to which a link is to be
established.
1. The ERT1-WD16CH-1 has been
registered as the device to which
a link is established.
2. Click the
New
Button to create
the connection.
1. Input a name for the connection.
2. Select
01_Output Only
.
3. Input the RPI.
4. Select the consume and
produce variables. Select
Output_35
as the produce
variable. Make sure that the
sizes of the variables are the
same.
5. Click the
Register
Button to
register the connection.
Summary of Contents for ERT1 Series
