![Omron ERT1 Series Operation Manual Download Page 35](http://html1.mh-extra.com/html/omron/ert1-series/ert1-series_operation-manual_743568035.webp)
15
Overview of System Startup Procedure
Section 2-1
After the connection has been established, the following window will be
displayed.
Common Procedure 5. Uploading the Current Network Configuration
This section explains the procedure for uploading the configuration informa-
tion from the devices connected to the EtherNet/IP network.
Select
Network
−
Upload
to start uploading the configuration of the current
network.
If the IP address of a connected device does not appear in the IP addresses
displayed in this dialog box, click the
Add
Button and register that IP address.
There may also be instances where the IP address of an unconnected device
is displayed. If that occurs, just click the
OK
Button.
Click the
OK
Button.
Make sure that online
status is indicated.
Make sure a blue mark
is displayed for
EtherNet/IP_1
.
Click the
Yes
Button.
Summary of Contents for ERT1 Series
