![background image](http://html1.mh-extra.com/html/omron/e5-c-series/e5-c-series_manual_742537012.webp)
E5GC
12
Terminal Block Appearance
Wires:AWG24 to AWG18 (equal to a cross-sectional area of 0.21 to 0.82 mm
2
) braided or solid wires
Note:
Refer to
Precautions When Wiring E5GC (Controllers with Screwless Clamp Terminal Blocks)
on page 132 for information on wiring
Controllers with screwless clamp terminal blocks.
Nomenclature
Controllers with Screw Terminal Blocks
• Terminal type: Forked or round crimped terminals
• Tightening torque for all terminals: 0.43 to 0.58 N·m
5.8 mm max.
5.8 mm max.
E5GC-
@
6
Controllers with Screw Terminal Blocks (M3 Screws)
0.8 to 1.4 mm
8 to 12 mm
8 to 12 mm
Controllers with Screwless Clamp Terminals Blocks
• Wire stripping length: 8 to 12 mm
• Ferrules: 8 to 12 mm
E5GC-
@
C
Controllers with Screwless Clamp Terminal Blocks
Left-panel
Setup Tool
port
Left Side View of the E5GC
Bottom View of E5GC
Bottom-panel Setup
Tool port
Front panel
Use the
U
D
Keys to set the parameter.
PV or specified parameter
SP or specified parameter value
Use the
M
Key to change
to another parameter.
No.2 display
Use
S
Key to change the
digit (default setting).
No. 1 display
Operation indicators
Temperature unit
Press
O
Key once to go to Adjustment Level.
Press
O
Key for at least 3 seconds
to go to the Initial Setting Level.
E5GC
Summary of Contents for E5 C Series
