Omron E5 C Series, Manual

Page: 127 / 137

E5
@
C/E5
@
C-T
127
Removing the Main Unit
Press in the two hooks on the Main Unit and remove the Main Unit
from the Terminal Unit.
End Plate Installation
Make sure to attach PFP-M End Plates to the ends of the Units.
E5DC-B
Mounting to and Removing from DIN Track
• Mounting a Unit
Mount the Main Unit after first mounting the Terminal Unit on the
DIN Track.
• Removing a Unit
Pull down on the DIN Track Hook with a flat-blade screwdriver and
lift up the Unit.
Removing the Main Unit
End Plate Installation
Make sure to attach PFP-M End Plates to the ends of the Units.
Mounting to a DIN Track in Connection
1. Remove the connector cover on the side to use for connecting to
another terminal unit, and attach the unit to the DIN Track.
2. Connect the terminal unit connector to the next unit.
3. Wire the terminal units.
4. Insert the main units into the terminal units.
(1)
(1)
(2)
Individual
Mounting
Group Mounting
A
B
(1) Pull down the hook.
(2) Catch the top hook
on the DIN Track.
(3) Press the Unit
onto the DIN
Track.
(4) Make sure that the
hooks are locked
in place.
(1)
(1) Push in the hooks.
(2) Pull out the Main Unit.
Individual
Mounting
Group Mounting
(1)
(2)
Connector Cover (Accessory)
Left side
End Plate
(1)
(2)
(4)
(3)