manualshive.com logo in svg

Omron E5 C Series, Manual

Share
Download
Omron E5 C Series Manual Download Page 4

E5GC

4

Optional Products (Order Separately)

USB-Serial Conversion Cable

Communications Conversion Cable

Note:

Always use this product together with the E58-CIFQ2.

This Cable is used to connect to the bottom-panel Setup Tool 

port.

Current Transformers (CTs)

*

Lead wires are included with these CTs. If UL certification is required, use

these CTs.

Mounting Adapter

Note:

This Mounting Adapter is provided with the Digital Temperature 

Controller.

Waterproof Packing

Note:

This Waterproof Packing is provided with the Digital 

Temperature Controller.

Draw-out Jig

CX-Thermo Support Software

Note:

CX-Thermo version 4.62 or higher is required for the E5GC.

For the system requirements for the CX-Thermo, refer to 

information on the EST2-2C-MV4 on the OMRON website 

(www.ia.omron.com).

Terminal Covers (for E5GC-

@

6)

Note:

This Terminal Covers is provided with the Digital Temperature 

Controller.

Model

E58-CIFQ2

Model

E58-CIFQ2-E

Hole diameter

Model

5.8 mm

E54-CT1

5.8 mm

E54-CT1L

*

12.0 mm

E54-CT3

12.0 mm

E54-CT3L

*

Model

Y92F-53 (2pcs)

Model

Y92S-P12

Model

Y92F-55

Model

EST2-2C-MV4

Model

E53-COV27

Summary of Contents for E5 C Series










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands