Omron E5 C Series, Manual

Page: 61 / 137

E5DC/E5DC-B
61
Optional Products (Order Separately)
Terminal Unit
Push-In Plus Terminal Unit
USB-Serial Conversion Cable
Communications Conversion Cable
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Current Transformers (CTs)
*
Lead wires are included with these CTs. If UL certification is required, use
these CTs.
Mounting Adapter
Short Bars (for E5DC)
CX-Thermo Support Software
Note: CX-Thermo version 4.6 or higher is required for the E5DC.
CX-Thermo version 4.69 or higher is required for the E5DC-B.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
End Plate
Spacer
DIN Tracks
Unit Labels
End Cover
Connector Cover (for E5DC-B)
Model
E5DC-SCT1S
Model
E5DC-SCT1B
Model
E58-CIFQ2
Model
E58-CIFQ2-E
Hole diameter Model
5.8 mm E54-CT1
5.8 mm E54-CT1L
*
12.0 mm E54-CT3
12.0 mm E54-CT3L
*
Model
Y92F-53 (2pcs)
Model
Y92S-P11 (4 pcs)
Model
EST2-2C-MV4
Model
PFP-M
Model
PFP-S
Model
PFP-100N
PFP-50N
Model
Y92S-L2
Model
Y92F-54
Model
E53-COV26