Omron E5 C Series Manual Download Page 98

Page: 98 / 137

E5EC-T/E5AC-T

Optional Products (Order Separately)

USB-Serial Conversion Cable

Communications Conversion Cable

Note:

Always use this product together with the E58-CIFQ2.

This Cable is used to connect to the front-panel Setup Tool

port.

Terminal Covers

Note:

The Terminal Covers E53-COV24 are provided with the Digital

Temperature Controller.

Waterproof Packing

Note:

This Waterproof Packing is provided with the Digital

Temperature Controller.

Waterproof Cover

Front Port Cover

Note:

This Front Port Cover is provided with the Digital Temperature

Controller.

Mounting Adapter

Note:

This Mounting Adapter is provided with the Digital Temperature

Controller.

Current Transformers (CTs)

Lead wires are included with these CTs. If UL certification is required, use

these CTs.

CX-Thermo Support Software

Note:

CX-Thermo version 4.61 or higher is required for the E5EC-T/

E5AC-T.

For the system requirements for the CX-Thermo, refer to

information on the EST2-2C-MV4 on the OMRON website

(www.ia.omron.com).

Model

E58-CIFQ2

Model

E58-CIFQ2-E

Model

E53-COV24 (3pcs)

Applicable Controller

Model

E5EC-T

Y92S-P9

E5AC-T

Y92S-P10

Applicable Controller

Model

E5EC-T

Y92A-49N

E5AC-T

Y92A-96N

Model

Y92S-P7

Model

Y92F-51 (2pcs)

Hole diameter

Model

5.8 mm

E54-CT1

5.8 mm

E54-CT1L

12.0 mm

E54-CT3

12.0 mm

E54-CT3L

Model

EST2-2C-MV4

Summary of Contents for E5 C Series










































































































































Search results

Summary of Contents for E5 C Series

Reviews:

Brands by name

Popular brands

Omron E5 C Series, Manual

Search results

Summary of Contents for E5 C Series

Reviews:

Brands by name

Popular brands