31
E3NW-CRT
User’s Manual
Sec
tion 2
In
st
al
la
ti
on an
d Con
n
ec
ti
ons
Section 2
Installation
4.
Secure the enclosed DIN Track End
Plates (PFP-M) onto the ends so that
there is no space between them and the
Units. Finally, attach the protective cap
you removed in step 3 to the Sensor
Amplifier Unit on the far right end.
Do not reverse the order of
steps 1 and 2, above. Doing so
may reduce the mounting
strength on the DIN Track.
After you have completed the above procedure, check to make sure that the
E3NW-CRT is mounted securely into place.
Removal Procedure
Use the following procedure to remove the Unit.
1.
Slide the Sensor Amplifier Units to
separate them from the Sensor
Communications Unit.
DIN Track
End Plate
Protective
cap
2
1
1
1
2
1
Do in order: step 1
and then step 2.
Do not perform
step 2 first.
