89
E3NW-CRT
User’s Manual
Sec
tion 5
App
e
ndic
e
s
Section 5
Command Descriptions and Data Formats
●
Hysteresis Width 2
This command sets Hysteresis Width 2 of the Sensor Amplifier Unit that corresponds to
the specified unit number.
●
Keep Setting
This command sets the Keep Setting of the Sensor Amplifier Unit that corresponds to
the specified unit number.
●
Hold Mode Setting
This command sets the hold mode of the Sensor Amplifier Unit that corresponds to the
specified unit number.
●
Warning Output Level
This command sets the Warning Output Level of the Sensor Amplifier Unit that
corresponds to the specified unit number.
●
Maximum Sensitivity Tuning
The command executes maximum sensitivity tuning for the Sensor Amplifier Unit that
corresponds to the specified unit number and output number.
This must be executed at least 3 seconds after the full auto tuning setup is performed.
Bit
Description
Data
00 to 31
Hysteresis Width 2
Data range: 0 (00000000 hex) to 9999 (0000270F hex)
Bit
Description
Data
00
Keep Setting
0: Keep OFF
1: Keep ON
01 to 31
No applicable data
Always 0
Bit
Description
Data
00
Hold Mode Setting
0: Peak
1: Bottom
01 to 31
No applicable data
Always 0
Bit
Description
Data
00 to 31
Warning Output Level
Data range: 0 (00000000 hex) to 100 (00000064 hex)