Omron CJ2H-CPU6 - REV 02-2010, Operation Manual, Page: 393 / 464

367
Error Log Function Section 14-4
03C4 Server connection error 00 hex: DNS
03 hex: SNTP
04 hex: FTP
06 hex: BOOTP
07 hex: SNMP
08 hex: SNMP Trap
01 hex: Specified host
does not exist
02 hex: No such service at
specified host
03 hex: Timeout
06 hex: Host name resolu-
tion error
07 hex: Transmission error
08 hex: Reception error
09 hex: Other error
0A hex: Obtaining IP
address error
No
03C6 Clock write error 0001: The clock time
could not be updated
because a error occurred
in the CPU Unit. Clear the error from the
CPU Unit. No
0002: The clock time
could not be updated
because the CPU Unit or
operating mode does not
support this function. Refer to SECTION 12
Automatic Clock Adjust-
ment Function and check
the application conditions.
03D0 Ethernet basic setting error 01 hex: Ethernet setting
error 01 hex: Checksum error
11 hex: Inconsistent set-
tings
12 hex: Specified baud
rate is not supported.
Yes
02 hex: TCP/IP basic set-
ting error 01 hex: Checksum error
11 hex: Invalid IP address
12 hex: Invalid subnet
mask
13 hex: Invalid default
gateway address
14 hex: Invalid primary
name server
15 hex: Invalid secondary
name server
16 hex: Invalid domain
name
17 hex: Invalid host name
03D1 Ethernet advanced setting error 02 hex: FINS setting error 01 hex: Checksum error
10 hex: Invalid IP router
table
11 hex: Invalid FINS/UDP
setting
12 hex: Invalid FINS/TCP
setting
13 hex: Invalid FTP setting
14 hex: Invalid SNTP set-
ting
15 hex: Invalid SNMP set-
ting
16 hex: Invalid SNMP trap
setting
Yes
03D2 Packet discarded. 01 hex 00 hex No
Error
code
(hex)
Error Detail code Saved in
EEPROM
First byte Second byte