manualshive.com logo in svg

Omron CJ2H-CPU6 - REV 02-2010, Operation Manual, Page: 181 / 464

Share
Download
Omron CJ2H-CPU6 - REV 02-2010 Operation Manual Download Page 181

155

Setting Tag Data Links

Section 6-2

Automatic Allocation Results for  Node 3 (IP Address: 192.168.250.3)

6.

After entering all of the settings in the data link table, select Save from the
File Menu. A consistency check will be performed on the table and the re-
sults will be displayed. 

a.

Table Inconsistencies

The following Check Result Dialog Box will be displayed. Correct the data
link table according to the displayed information. 

To save the check results, click the Copy To Clipboard Button and paste
the results to other file, such as the text pad. 

Click the OK Button. The following message will be displayed. Click the OK
Button again to return to the EtherNet/IP Datalink Tool Window.

Summary of Contents for CJ2H-CPU6 - REV 02-2010

















































































































































































































































































































































































































































































Reviews:

No comments