18
4.3.2 Get Readings from the Connector/Transmitter (continued)
While accessing the "Readings" page, If a blank screen appears without any
"java application running" or image of a "Java logo", please verify you have the
latest Java Runtime Environment installed and configured according to the
Section 4.3.3.1.
If you do not have Java Runtime Environment, you may
download it from our website or contact the Customer Service Department
nearest you.
The
"
Readings
"
fields are defined as follows:
Title:
Receiver’s name, assigned in "Configuration" page.
Name:
Connector/Transmitter’s name, assigned in "Sensor Parameters" page.
ID:
Device ID/address
Sequence:
Sequence number [
0-255, Lost
].
The Sequence number is incremented for each newly received data. Therefore, it
indicates if the sensor is transmitting data successfully.
This area also will display error messages:
Lost
Receiver has not received data from the Connector/Transmitter.
Reading Values:
The order from left to right is: Process, Ambient, then Dewpoint.
First Reading
Process - reading with temperature or humidity unit.
Second Reading
Ambient - ambient temperature reading with temperature unit.
Third Reading
Dewpoint - dewpoint calculated only if humidity sensor is present.
Reading "Open" indicates that no sensing device is detected.
Data Logging:
Press to activate/deactivate data logging. When it is pressed to activate
data logging, a file browser pops up to ask for which file data will be saved.
Data is in Comma Separated Value (csv) format, which can also be opened in Excel.
Please name file with
.csv
extension.
Figure 4.9 Comma Separated Value Format
