4.3 Receiver’s Configurations and Operations
Using a web browser, you should be able to view the Receiver’s homepage.
•
Start your web browser.
•
From the browser you type
http://zxxxx
using the last four-digits from the MAC
address label located on the device if DHCP and DNS are used. If a static IP address
is used, then simply type
http://x.x.x.x
, where
x.x.x.x
is the Receiver’s IP address.
•
The Home Page, will be displayed.
Figure 4.5 Wireless System Home Page Menu
In order to access certain menu items of the Home Page, users may be
prompted for a password, as shown in the two figures below.
Figure 4.6 LOGIN and ADMINISTRATOR Passwords
There are 2 different access levels:
1.
ADMINISTRATOR Password
(administrator) allows certain groups and individual users to
access and modify "entire" parameters without any restrictions.
The default password is
00000000
. This password can be up to 16 alphanumeric case-
sensitive characters.
2.
LOGIN Password
(operator) allows users to access and modify all of the parameters,
except "Access Control" which requires an Administrator password.
The default password is
12345678
. This password can be up to 16 alphanumeric
case-sensitive characters.
ADMINISTRATOR
ADMINISTRATOR
LOGIN
LOGIN
http://192.168.1.200
http://192.168.1.200
WIRELESS SENSORS HOME PAGE
Firmware Version x.x
HOME PAGE
http://192.168.1.200
Address
Readings
Diagnostic
Configuration
Chart
Sensor Setup
Access Control
15
