29
4.3.8 Sensor Setup (continued)
Figure 4.19 Sensor Setup
#:
Sensor ID/address configured on the Connector/Transmitter. Click on the number to
view and modify Sensor Parameters. See
Figure 4.20.
Check:
Each check box controls whether or not readings from the Connector /
Transmitter will be outputted. If unchecked, the readings from the Connector/Transmitter
will not be displayed on the "Readings", "Chart" and "Diagnostic" pages nor it will be
reported through Telnet.
Sensor Name:
Name of a Connector/Transmitter shows on the "Readings" and "Chart"
pages, this is a text field and can take up to 8 alphanumeric characters.
Updates Seconds:
How often a Connector/Transmitter sends its data to the Receiver.
Units:
Type of data and the corresponding units. Units of measurement from sensors
inside a Connector/Transmitter that has joined the network will be displayed. [º
C
,º
F
or
%
].
Update Checked Box:
After checking/unchecking the boxes, make sure this is clicked to
save the changes.
SENSOR SETUP
Main Menu
Click on Sensor # to modify Sensor Parameters
SETUP
http://192.168.1.200
Update Checked Box
Readings
Charts
Select Another Group
0
1
2
3
4
5
6
7
#
ABCDEFGH
LAB 50
LAB 100
CLN RM1
CLN RM2
ABCDEFGH
OVEN5
ABCDEFGH
Sensor Name Update Seconds
120
120
120
120
120
120
120
120
--
C, K Type
C, K Type
C, Pt. RTD
C, I.R.
%, R.H.
--
--
Units
Check
