31
31
Update:
Saves changes.
Reset Value:
Ignores changes and puts previous values back in the fields.
Cancel:
Ignores all the changes and goes back to the "Sensor Setup" page.
Reset Sensor:
Reset the Connector/Transmitter readings and status. Its data will be
cleared immediately.
Select Another Group:
Go back to the group selection page to setup sensors.
4.3.9 Access Control
This section describes the "Access Control" page of the Wireless System Web interface. This
page allows the users to set up the network and security parameters of the Wireless System.
At the initial entrance to the "Access Control" page you may be prompted for the LOGIN
Password (see
Figure 4.6
) prior to an ADMINISTRATOR Password.
Figure 4.21 Access Control
Login Password:
This allows users to access and modify all of the Wireless System
Home Page menu items, except "Access Control", which requires an Administrator
password. The default Login password is
12345678
. This password can be up to 16
alpha-numeric case-sensitive characters.
If there is no Login Password assigned (blank box) the Wireless System will not require a
password to access and modify the Wireless System Home page menu items.
Admin (administrator) Password:
This allows users to access and modify the "Access
Control" page. The default password is
00000000
. This password can be up to 16 alpha-
numeric case-sensitive characters.
If there is no Administrator Password assigned (blank box) the Wireless System will not
require password to access and modify "Access Control" page.
Host Name:
Name of the server (DNS) max 16 characters, default is "z" and the last 4
digits of the MAC address. Refer to
Section 3.4
, DNS.
ACCESS CONTROL
ACCESS CONTROL
http://192.168.1.200
Address
Main Menu
Login Password 12345678
Admin Password 00000000
IP Address 192.168.1.200
Gateway Address
0.0.0.0
Subnet Mask
255.255.255.0
MAC Address 00:03:34:00:85:C4
Host Name
z85C4
Save Reset
Network Reset
