6
6
27
27
INSTRUMENT ACCURACIES
All ±1 digit.
0.1% rdg ±0.2°C/0.4°F above -100°C/-148°F
0.5% rdg ±0.2°C/0.4°F below -100°C/-148°F
±0.2°C/0.4°F over range -20°C to +70°C/-4°F to +158°F
±0.1% rdg ±0.2°C/0.4°F elsewhere
±0.2% rdg ±0.1°C/0.2°F over range -150°C to +800°C/-238°F to
+1472°F
Accuracy statement for type J thermocouples are valid to -150
SpeedRead
: This function reduces the accuracy from Class
0.5 to 2 (CEN TC141/WG12 N42E applies) ±2°C.
Models HH2001A, HH200lK, HH2001KL, HH2002A, HH2002AL,
HH2002K:
Models HH2001T, H2001LTC:
Models HH2001P, HH2001PL:
R & S Type thermocouple
Better than 0.1% scale ±0.2% rdg ±1 digit.
°C
only, type R&S accuracies are not valid below 25°C.
INSTRUMENT ACCURACIES
All ±1 digit.
0.1% rdg ±0.2°C/0.4°F above -100°C/-148°F
0.5% rdg ±0.2°C/0.4°F below -100°C/-148°F
±0.2°C/0.4°F over range -20°C to +70°C/-4°F to +158°F
±0.1% rdg ±0.2°C/0.4°F elsewhere
±0.2% rdg ±0.1°C/0.2°F over range -150°C to +800°C/-238°F to
+1472°F
Accuracy statement for type J thermocouples are valid to -150
SpeedRead
: This function reduces the accuracy from Class
0.5 to 2 (CEN TC141/WG12 N42E applies) ±2°C.
Models HH2001A, HH200lK, HH2001KL, HH2002A, HH2002AL,
HH2002K:
Models HH2001T, H2001LTC:
Models HH2001P, HH2001PL:
R & S Type thermocouple
Better than 0.1% scale ±0.2% rdg ±1 digit.
°C
only, type R&S accuracies are not valid below 25°C.
To output data to a PC press
key, then key.
Ensure PC/Printer is ready to receive information.
The selected transmit option number will be displayed during
transmission. After transmission, the unit will return to normal
operation and any auto logging will stop.
To erase stored data press
key, then and
keys.
2
3
There will be a delay before the unit will accept the
key and
symbol will be displayed. This is to help stop accidental erasure.
After erasure, neither
or
symbols will be displayed. The
unit will return to normal mode.
To output data to an Epson compatible printer press
key,
followed by key. Printer settings must be as follows: 9600
Baud, 8 data bits, No Parity, One stop bit, No flow control. It is
also possible to print to Hyper Terminal in your PC in this way.
4
If after pressing key you do not
wish to delete data you must turn instrument off and on, then the
stored data will not be lost.
3
To output data to a PC press
key, then key.
Ensure PC/Printer is ready to receive information.
The selected transmit option number will be displayed during
transmission. After transmission, the unit will return to normal
operation and any auto logging will stop.
To erase stored data press
key, then and
keys.
2
3
There will be a delay before the unit will accept the
key and
symbol will be displayed. This is to help stop accidental erasure.
After erasure, neither
or
symbols will be displayed. The
unit will return to normal mode.
To output data to an Epson compatible printer press
key,
followed by key. Printer settings must be as follows: 9600
Baud, 8 data bits, No Parity, One stop bit, No flow control. It is
also possible to print to Hyper Terminal in your PC in this way.
4
If after pressing key you do not
wish to delete data you must turn instrument off and on, then the
stored data will not be lost.
3
The overall performance of the instrument is obtained by combining the stated accuracy
and any uncertainty due to the measurement process.
The overall performance of the instrument is obtained by combining the stated accuracy
and any uncertainty due to the measurement process.
WARRANTY / DISCLAIMER
RETURN REQUESTS / INQUIRIES
OMEGA ENGINEERING, INC warrants this unit to be free of defects in materials and
workmanship for a period of 25 months from the date of purchase. OMEGA Warranty
adds an additional one (1) month grace period to the normal one (1) year product
warranty to cover handling and shipping time. This ensures that OMEGA’S
customers receive maximum coverage on each product. If the unit malfunctions, it
must be returned to the factory for evaluation. OMEGA’s Customer Service Depart-
ment will issue an Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be defective, it will be
repaired or replaced at no charge. OMEGA’S WARRANTY does not apply to defects
resulting from any action of the purchaser, including but not limited to mishandling,
improper interfacing, operation outside of design limits, improper repair, or
unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of
excessive corrosion; or current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of OMEGA’s control.
Components which wear are not warranted, including but not limited to contact points,
fuses, and triacs. OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for any omissions or
errors nor assumes liability for any damages that result from the use if its products in
accordance with information provided by OMEGA, either verbal or written. OMEGA
warrants only that the parts manufactured by it will be as specified and free of
defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE,
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS-
CLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein
are exclusive, and the total liability of OMEGA with respect to this order, whether
based on contract, warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon which liability is based.
In no event shall OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be
used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any
nuclear installation or activity; or (2) in medical applications or used on humans.
Should any Product(s) be used in or with any nuclear installation or activity, medical
application, used on humans, or misused in any way, OMEGA assumes no
responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and,
additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any
liability or damage whatsoever arising out of the use of the Product(s) in such a
manner.
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service
Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER
MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the outside of the
return package an on any correspondence.
FOR WARRANTY RETURNS,
For NON-WARRANTY REPAIRS,
please have the following information
consult OMEGA for current repair
available BEFORE contacting OMEGA:
charges. Have the following information
1. Purchase Order number under which
available BEFORE contacting OMEGA:
the product was PURCHASED,
1. Purchase Order number to cover the
2. Model and serial number of the
COST of the repair/calibration
product under warranty, and
2. Model and serial number of the
3. Repair instructions and/or specific
product, and
problems relative to the product.
3. Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1998 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in
whole or in part, without the prior written consent of OMEGA ENGINEERING, INC. It is the policy of
OMEGA to comply with all worldwide safety and EMC / EMI regulations that apply. OMEGA is constantly
pursuing certification of its products to the European New Approach Directive. OMEGA will add the CE
mark to every appropriate device upon certification. The information contained in this document is believed
to be correct, but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the
right to alter the specifications without notice. WARNING: These products are not designed for use in, and
should not be used for, patient connected applications.
WARRANTY / DISCLAIMER
RETURN REQUESTS / INQUIRIES
OMEGA ENGINEERING, INC warrants this unit to be free of defects in materials and
workmanship for a period of 25 months from the date of purchase. OMEGA Warranty
adds an additional one (1) month grace period to the normal one (1) year product
warranty to cover handling and shipping time. This ensures that OMEGA’S
customers receive maximum coverage on each product. If the unit malfunctions, it
must be returned to the factory for evaluation. OMEGA’s Customer Service Depart-
ment will issue an Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be defective, it will be
repaired or replaced at no charge. OMEGA’S WARRANTY does not apply to defects
resulting from any action of the purchaser, including but not limited to mishandling,
improper interfacing, operation outside of design limits, improper repair, or
unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of
excessive corrosion; or current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of OMEGA’s control.
Components which wear are not warranted, including but not limited to contact points,
fuses, and triacs. OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for any omissions or
errors nor assumes liability for any damages that result from the use if its products in
accordance with information provided by OMEGA, either verbal or written. OMEGA
warrants only that the parts manufactured by it will be as specified and free of
defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE,
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS-
CLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein
are exclusive, and the total liability of OMEGA with respect to this order, whether
based on contract, warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon which liability is based.
In no event shall OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be
used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any
nuclear installation or activity; or (2) in medical applications or used on humans.
Should any Product(s) be used in or with any nuclear installation or activity, medical
application, used on humans, or misused in any way, OMEGA assumes no
responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and,
additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any
liability or damage whatsoever arising out of the use of the Product(s) in such a
manner.
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service
Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER
MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the outside of the
return package an on any correspondence.
FOR WARRANTY RETURNS,
For NON-WARRANTY REPAIRS,
please have the following information
consult OMEGA for current repair
available BEFORE contacting OMEGA:
charges. Have the following information
1. Purchase Order number under which
available BEFORE contacting OMEGA:
the product was PURCHASED,
1. Purchase Order number to cover the
2. Model and serial number of the
COST of the repair/calibration
product under warranty, and
2. Model and serial number of the
3. Repair instructions and/or specific
product, and
problems relative to the product.
3. Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1998 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in
whole or in part, without the prior written consent of OMEGA ENGINEERING, INC. It is the policy of
OMEGA to comply with all worldwide safety and EMC / EMI regulations that apply. OMEGA is constantly
pursuing certification of its products to the European New Approach Directive. OMEGA will add the CE
mark to every appropriate device upon certification. The information contained in this document is believed
to be correct, but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the
right to alter the specifications without notice. WARNING: These products are not designed for use in, and
should not be used for, patient connected applications.
