Omega CN16Pt, User Manual

Page: 15 / 61

PLATINUM
TM
Series User’s Guide
15 Complete Menu Structure
2.4 Circular Flow of Menus
The following diagram shows how to use the LEFT and RIGHT buttons to navigate around a menu.
Figure 2.2 – Circular Flow of Menus
3. Complete Menu Structure
3.1 Initialization Mode Menu (INIt)
The following table maps the Initialization Mode ( INIt ) navigation:
Level
2
Level
3
Level
4
Level
5
Level
6
Level
7
Level
8
Notes
INPt t.C. k Type K thermocouple
J Type J thermocouple
t Type T thermocouple
E Type E thermocouple
N Type N thermocouple
R Type R thermocouple
S Type S thermocouple
b Type B thermocouple
C Type C thermocouple
Rtd N.wIR 3 wI 3-wire RTD
4 wI 4-wire RTD
2 wI 2-wire RTD
A.CRV 385.1 385 calibration curve, 100 Ω
385.5 385 calibration curve, 500 Ω
385.t 385 calibration curve, 1000 Ω
392 392 calibration curve, 100 Ω
3916 391.6 calibration curve, 100 Ω
tHRM 2.25k 2250 Ω thermistor
5k 5000 Ω thermistor
10k 10,000 Ω thermistor
Press the ENTER button on
oPER
to select and enter RUN
Mode.
Press the LEFT and RIGHT
buttons to navigate around
the Operating Mode options.
Press the UP button to
navigate back up a level.
It is possible to cycle through
any menu in both directions.
oPER
SP1 Stby
RUN
L.RST PAUS
SToP
SP2 PEAk
MANL VALy
Omega Engineering | www.omega.com