PLATINUM
TM
Series User’s Guide
27
Reference Section: Initialization Mode (INIt)
Navigate to the desired setting. Settings include the following:
•
ALM.1
– The configuration defined by
PRoG > ALM.1
determines the state of the
annunciator. The annunciator turns on when the Alarm condition exists (factory
default for
ANN.1
).
•
ALM.2
– The configuration defined by
PRoG > ALM.2
determines the state of the
annunciator (factory default for
ANN.2
).
•
oUt#
– “
oUt#
” is replaced by a list of the names of all outputs that are not analog
outputs. For example, the output choices
dtR.1
and
dC.1
are listed for a “145”
configuration, and
ANG.1
is not listed.
Select the indicated option.
4.2.5
Normal Color (INIt > RdG > NCLR)
Select the Normal Color (
NCLR
) parameter. This controls the default display color, which can
then be overridden by Alarms.
Navigate to the desired setting. Settings include the following:
•
GRN
– Green (factory default)
•
REd
– Red
•
AMbR
– Amber
Select the indicated option.
4.2.6
Brightness (INIt > RdG > bRGt)
Select the Brightness (
bRGt
) parameter.
Navigate to the desired setting. Settings include the following:
•
HIGH
– High display brightness (factory default)
•
MEd
– Medium display brightness
•
Low
– Low display brightness
Select the indicated option.
4.3
Excitation Voltage (INIt > ECtN)
Select the Excitation Voltage (
ECtN
) parameter.
Navigate to the correct setting. Settings include the following:
•
5 V
– 5 Volt excitation voltage (factory default)
•
10 V
– 10 Volt excitation voltage
•
12 V
– 12 Volt excitation voltage
•
24 V
– 24 Volt excitation voltage
•
0 V
– Excitation turned off
Select the indicated option.
Omega Engineering | www.omega.com
