![background image](http://html1.mh-extra.com/html/omega/cn16pt/cn16pt_user-manual_4067472041.webp)
PLATINUM
TM
Series User’s Guide
41
Reference Section: Programming Mode (PRoG)
5.4.1.1
Turn Off Output Channel (PRoG > oUt1–oUt3 >
ModE > oFF)
Turn off this output (
oFF
).
5.4.1.2
PID Control Mode (PRoG > oUt1–oUt3 > ModE >
PId)
Select PID Control Mode (
PId
) for this output (factory default). PID parameters are
set outside the specific output submenus, as more than one output can be used for
PID control at a time. See
5.5 PID Configuration (PRoG > PID)
5.4.1.3
On/Off Control Mode (PRoG > oUt1–oUt3 >
ModE > oN.oF)
Select On/Off Control Mode (
oN.oF
) for this output. More than one output can be
set up for
oN.oF
control. For Heat / Cool control set the output connected to the
heater with
ACtN
equal to
RVRS
and the output connected to the cooling device
with
ACtN
set to
dRCt
.
Navigate to the desired setting. Settings include the following:
•
ACtN
– Determines the action direction for control
•
dEAd
– Sets the deadband value; the deadband value is applied in the
same units as the process variable to one side of Setpoint as determined by
the
ActN
direction
•
S
.
PNt
– Allows either Setpoint 1 or Setpoint 2 to be specified as the
target value; Setpoint 2 can be set to track Setpoint 1 using the deviation
(
dEVI
) option (
)—a useful feature when setting
up for heat/cool operation
Select the indicated setting.
For
ACtN
, select the correct setting. Settings include the following:
•
RVRS
– Off when Process Value is > Setpoint, and on when Process Value
is < Setpoint (e.g., heating); deadband is applied below Setpoint (factory
default)
•
dRCt
– Off when Process Value is < Setpoint, and on when Process Value
is > Setpoint (e.g., cooling); deadband is applied above Setpoint
For
dEAd
, set the desired value. (The default is 5.0.)
Select the indicated
ACtN
setting, or confirm the
dEAd
value.
5.4.1.4
Output as Alarm 1 (PRoG > oUt1–oUt3 > ModE >
ALM.1)
Select this Output to be an Alarm using the Alarm 1 (
ALM.1
) configuration.
Omega Engineering | www.omega.com