Figure 237
10. Conduct a nozzle test with abrasive.
CAUTION
Use care when opening or closing the lid to avoid injury. Keep hand, fingers, or
body part away from the side of the table when closing the lid. Never let the lid
free-fall.
a. Open the
lid
.
b. Visually check the condition of the
garnet abrasive feed tube
, replace as
needed.
c. Connect one end of the
garnet abrasive feed tube
to the
garnet abrasive feed
block
[1] and connect the other end to the
nozzle
[2].
CAUTION
Bacteria in the tank water can build up. A minor break in the skin can introduce
harmful bacteria into a wound. Always wear protective gloves if you have cuts or
open wounds on your hands. When setting up material for cutting, wear gloves that
provide protection against sharp metal edges.
Figure 238
d. Open
MAKE
and use the
X
,
Y Jog
buttons
[1] or
keyboard arrow keys
to
position the
nozzle
between two
slats
.
Summary of Contents for ProtoMax
Page 45: ......
