cutting process. If the material moves during machining, the part will not be precise
and may be ruined.
NOTE:
See the help files for best practices tips on fixturing materials.
Figure 216
[1] Holding arm, short
[3] Holding post
[3] Holding arm, long
Power Switch
AC power is controlled by a power switch located on the electrical control enclosure.
All ProtoMAX system power is removed when OFF.
Figure 217
[1] Power ON position
[2] Power selector
[3] Power OFF
position
Garnet Abrasive Delivery System
The garnet abrasive delivery system consists of the high-pressure nozzle, garnet
abrasive feed system (hopper and feed tube), and high-pressure plumbing. The
garnet abrasive hopper lid keeps the garnet abrasive from being contaminated with
debris or getting wet. The garnet abrasive screen helps to filter small pieces of debris
when filling the hopper that may clog the feed tube or nozzle. When machining a
part, the garnet abrasive flows from the hopper to the abrasive waterjet nozzle
through the garnet abrasive feed tube.
Summary of Contents for ProtoMax
Page 45: ......
