Figure 247
15. Set the
nozzle
standoff at the highest point on the material.
NOTICE
Always hold the nozzle when loosening the hand knob. Do not let the nozzle fall
and strike the cutting deck slats or material to avoid damage to the nozzle and/or
nozzle components.
Figure 248
16. Position the
nozzle
at the path start.
NOTICE
To extend the life of the catcher tank, cut towards the center of the tank.
Continuous cutting at the outer edges of the cutting envelop may allow the jet
stream to wear through the sides of the catcher tank.
17. Close the
lid
.
CAUTION
Use care when opening or closing the lid to avoid injury. Keep hand, fingers, or
body part away from the side of the table when closing the lid. Never let the lid
free-fall.
a. Lift the
lid
and push the
support arm
towards the back.
Summary of Contents for ProtoMax
Page 45: ......
