Figure 281
21. Clean the
orifice assembly
and the
nozzle body
(including the air vent hole)
thoroughly prior to reassembly.
NOTE:
Do not use a brush or cotton swab or foam-tipped applicator to apply lubricants because
they may leave fibers and clog the nozzle.
22. Apply a light coat of Blue Goop to the
second and third threads
[1] of the
inlet
body
, and then spread the lubricant evenly around the
inlet body threads
.
NOTE:
Use care when applying lubricants around high-pressure water routes. Lubricants can
enter the high-pressure water system and clog the orifice and/or mixing tube.
Figure 282
23. Wipe the excess Blue Goop from the end of the
inlet body
[1].
Summary of Contents for ProtoMax
Page 45: ......
