Omax ProtoMax, Operation Manual

Page: 14 / 45

Figure 220
[1] Crankcase [6] High-pressure water transducer
[2] High pressure wet-end [7] High-pressure water OUT connection
[3] Safety valve [8] Cooling line OUT connection
[4] Cooling line IN connection [9] High-pressure nipple support bracket
[5] Water IN connection [10] Electrical connection
Water Filter
The water filter removes debris from incoming water that can clog and damage the
high-pressure components. The water filter is mounted on the side of the table
assembly. The outlet water pressure is monitored by the pressure gauge mounted on
the water filter.
NOTICE
Do not operate the ProtoMAX without the incoming water supply filter. Operating
the ProtoMAX without the water supply filter will introduce debris into the system
and may damage the pump and high-pressure system.
Figure 221
[1] Water manifold [4] Water control solenoid [7] Water temperature transducer