63
IX73
} The cables can be laid properly by using the cable holders pro-
vided with each module.
•
IX3-CBM (4 pcs.)
•
Back side of IX3-ILL (2 pcs. they have already been attached.)
•
On IX3-LWUCDA (1 pc. it has already been attached.)
} Attach the cable holders provided with IX3-CBM to the microscope
(IX73P1F or IX73P2F) as needed.
} The number of the cable holders used vary depending on the
modules used in the system.
} The basic positions for attaching the cable holders and the method
of cable distribution are illustrated below.
} If the cable holders are attached in widely deviated positions, the
cable may become unable to reach the connector. Be sure to
attach the cable holders while confirming that their positions allow
the cable to reach the connector.
Bundle the cables loosely giving plenty of length so that they
won’t be stretched when operable parts move.
Particularly, do not bundle the cables connected to the stage or
the condenser with tension in all movement ranges.
CAUTION
15
Cable Distributions
Cable holder
(They have already been attached.)
Cable holder
Attach as needed.