10
OM1
PO/OM3
PH/OM4
DIC/OM2
BF/OM5
FL/OM6
ATTENUAT
OR / DIC
IX3
Before use, post the number stickers/indication plates (provided with IX3-CBM).
For details, read the instruction manual for the IX3-CBM/U-HSCBM.
*These buttons are defeated when the coded 6 position nosepiece IX3-D6RES or the coded fluorescent mirror turret
IX3-RFACS is used.
Attenuator / DIC button
For use in switching of the filters.
Mirror button*
For use in switching of
the mirror units.
Objective button*
For use in switching of objectives.
Memory button
FL Shutter button
Observation button
· DIC: Differential interference contrast observation
· PO: Polarized light observation
· PH: Phase contrast observation
· BF: Brightfield observation
· FL: Fluorescence observation
· OM1 to OM6: Buttons used to change the
observation mode by connecting to PC and
operating Software cellSens.
The observation mode is assigned to the button
by Software cellSens.
Connector
LWD Universal Condenser
IX2-LWUCD
UCD-Adapter
IX-ADUCD
ULWCD Condenser
IX-ULWCD
} This is a manually controlled condenser.
} This is a manually controlled condenser.
} This is a manually controlled condenser. Refer
to the separate instruction manual for details.
Turret
Turret
Condenser height fine
adjustment knob
Aperture iris
diaphragm lever
Aperture iris
diaphragm lever
Universal Condenser
U-UCD8
Hand Switch
U-HSCBM
Note: Digital images captured by cellSens are not intended for clinical diagnostic use.
