IPLEX GAir
4.
Insert the cap
(D)
into the distal end and rotate it to attach to the base.
If it is difficult to rotate the cap
(D)
, there is a possibility that the position of the hole
(E)
of
the guide head is not aligned with the position of the D cut
(F)
of the distal end. Align the
positions again and rotate the cap
(D)
.
Attaching the guide head (when using the optical adapter 220D)
1.
Remove the optical adapter
(B)
from the distal end.
* For detail operations, see "Attaching and removing the optical adapter" (page 54).
2.
Rotate the cap
(D)
to remove it from the base
(C)
of the guide head.
3.
Insert the base
(C)
into the distal end from the smaller diameter.
4.
Insert the cap
(D)
into the distal end.
5.
Attach the optical adapter
(B)
to the distal end.
* For detail operations, see "Attaching and removing the optical adapter" (page 54).
6.
Align the notch
(F)
of the cap
(D)
with one of the D cuts (4 positions)
(G)
, and hold the
base and insertion tube.
It does not matter which of the four of D cuts
(G)
is used.
7.
Align the base
(C)
with the cap
(D)
, and rotate it to attach to the base.
If it is difficult to rotate the base
(C)
, there is a possibility that the position of the notch
(F)
of the cap
(D)
is not aligned with the position of the D cut
(G)
of the distal end. Align the
positions again, and rotate the base
(C)
.
59
Summary of Contents for IPLEX GAir IV9000GA
Page 2: ......
