Olympus IPLEX GAir IV9000GA Instructions Manual Download Page 89

Page: 89 / 157

IPLEX GAir

When the lock belt is secured

When the lock belt is released

4.6 Adjusting the display of the live image

4.6.1 Still image (Freeze)

While the live image is displayed, press the [FREEZE] button.

The observed image is frozen and the freeze icon (

) is displayed in the upper right corner

of the LCD monitor. Do not insert or pull out the insertion tube while the image is frozen.

Press the [FREEZE] button.

The image will be unfrozen.

TIP:

Freezing a live image that contains rapid movement may result in a blurred image.

4.6.2 Enlarging the image (Zoom)

Operating the [ZOOM] lever upward zooms (enlarges) the image by up to 5 times.

To restore the image to the original size, operate the [ZOOM] lever downward.

TIP:

Images are zoomed using the “digital zoom” function. Therefore, the image may become slightly
coarse at higher zoom factors. The recorded still image may become less coarse when [MENU] -
<IMAGE MODE> - <DYNAMIC NOISE REDUCTION> is set to <ON>.

4.6.3 Adjusting the brightness

Adjusting the brightness using the [BRIGHT] lever

The [BRIGHT] lever is used to adjust the brightness when changing the entire brightness of the
live image during observation.

Summary of Contents for IPLEX GAir IV9000GA






























































































































































Search results

Summary of Contents for IPLEX GAir IV9000GA

Reviews:

Related manuals for IPLEX GAir IV9000GA

Brands by name

Popular brands

Olympus IPLEX GAir IV9000GA, Instructions Manual

Search results

Summary of Contents for IPLEX GAir IV9000GA

Reviews:

Related manuals for IPLEX GAir IV9000GA

Brands by name

Popular brands