DMTA-10055-01EN, Rev. A, February 2015
Chapter 1
22
1.1.1
Adjustment Knob Configuration
The adjustment knob configuration provides smooth value slewing (see Figure 1-6 on
page 23). The adjustment knob is used along with the check key to adjust parameter
values in either coarse or fine increments.
The adjustment knob (
) increases or decreases the value of a highlighted
adjustable parameter.
The Check key (
) toggles a highlighted adjustable parameter between coarse and
fine (see Figure 1-5 on page 22):
•
Coarse adjustment is active when the highlighted parameter is surrounded by
brackets.
•
Fine adjustment is active when there are no brackets.
Figure 1-5 Coarse (left) and fine (right) adjustment selection
The Escape key (
) has three primary functions:
•
When in a setup page,
returns to the live inspection screen.
•
When in a selected menu,
returns to the basic menu.
•
When a direct access parameter (gain, range, gates, etc.) is selected,
returns to
the previous menu.
The direct access keys cause the software interface to jump directly to the associated
parameter or activate a function (see “Direct-Access Keys” on page 28).
Summary of Contents for EPOCH 650
