DMTA-10055-01EN, Rev. A, February 2015
Data Logger
219
•
In an advanced file type, the data is saved to the current location if the ID is
empty. If the ID is populated, a pop up asks if you want to overwrite the ID. If
you press
No
(P2 key) the next ID is selected.
Figure 10-25 Grid controls in the live screen
To overwrite data in a live screen
1.
Use the Up and Down arrow buttons to navigate to the cell to overwrite (see “To
use the arrow buttons” on page 220).
2.
Make a measurement
3.
Press
Save
(P7 key).
A dialog box pops up asking if you want to overwrite the ID.
4.
Select
Yes
(P1 key) to overwrite the data.
To use a grid when viewing a saved file
1.
Choose
File > Open
(group 5/5).
2.
Select a file from the list and press
Contents
(P3 key).
3.
Use the arrow buttons to navigate through the grid (see “To use the arrow
buttons” on page 220).
Summary of Contents for EPOCH 650
