![background image](http://html1.mh-extra.com/html/olympia/millennium-e/millennium-e_owners-manual_732546073.webp)
The Ultimate Ice Resurfacer
65
6.4.5 Top Link Adjustment
Check to make sure the entire lenght of the runners are still on the ice surface.
Drive the OLYMPIA once around the rink.
When the top link is adjusted properly the rear tires should leave a full tread pattern on the ice.
Please Note: It is essential for proper operation that rear tire pressure be maintained at 85 psi
(5.8 bar).
To test the top linkage, first loosen the lock nuts on both top links.
Now loosen both top links by turning them counter clockwise until there is no tension.
Remount the OLYMPIA and drive forward six feet (2 meters), stop, turn off the OLYMPIA and
dismount.
Now simultaneously re-tighten the top links by turning them clockwise making sure to extend
the top link to hand tight only.
Secure the top links by tightening the lock nuts.
Check to make sure the front of the runners are still on the ice surface. When properly
adjusted the runners will not leave any marks on the ice surface.
Please Note: It is essential that you adjust both top links at the same time, and in the same
direction.
Summary of Contents for Millennium-E
