Olympia Millennium-E, Owner'S Manual

Page: 72 / 235

The Ultimate Ice Resurfacer 64
6.4.4 Down Pressure Adjustment
To adjust the down pressure, stop the OLYMPIA, place it in park and lower the conditioner until
it is almost touching the ice surface.
Properly dismount and turn the down pressure stop bolts in (clockwise) 5 full turns.
Remount the OLYMPIA, lower the conditioner until you have three tire lugs or 5” (12.7mm) of
the tire touching the ice. Shut off the OLYMPIA, and dismount. Turn the down pressure stop
bolts until they are tight against the down stops under the conditioner arms.
Now tighten the jam nuts.
Too much down pressure will lift the rear wheels off the ice resulting in a loss of control.
Too little down pressure will result in rippled ice and gouging in the corners.
Please Note: Every time you reset the down pressure you have to reset the top link
adjustment.
Down Pressure
Adjustment Bolt