Olympia Millennium-E Owner'S Manual Download

Page: 93 / 235

The Ultimate Ice Resurfacer

8.2.5 Monthly

• Have the battery voltage measured and battery acid density checked by a battery

specialist. Add distilled water, if necessary.

•

Check whether the battery box is dry.

• Inspect the hydraulic system for any sign of leaks.

•

Check the belt tension at all drive belts.

•

Check the tire pressure (85 psi or 5.8 bar).

•

Check that all lug nuts are tight (140 Nm).

•

Check all traction drives for leaks.

•

Check that the parking brake cable runs smoothly, re- lubricate it with penetrating oil, if

necessary.

•

Check the hydraulic oil level in the hydraulic tank.

•

Check that the board guide roller runs smoothly.

•

Check the surface of the blade holder in the conditioner and lightly oil it.

•

Briefly test all functions.

•

Check the tension of the conditioner drive chain, it should not have more than ½ inch (1,27
cm) of play.

• Spray lubricant onto the conditioner drive chain.

Summary of Contents for Millennium-E












































































































































































































































Search results

Summary of Contents for Millennium-E

Reviews:

Related manuals for Millennium-E

Brands by name

Popular brands

Olympia Millennium-E, Owner'S Manual

Search results

Summary of Contents for Millennium-E

Reviews:

Related manuals for Millennium-E

Brands by name

Popular brands