22.
Complete both Narrow Wall attachments making sure 2x3 wall framing is flush with floor framing,
and siding of wall is overhanging the floor by approximately 1/2”.
23.
There are 2 - 6 1/2” Door Header End Plates. Align dado cut on top facing outward and flush to
inside of wall framing. Attach each with 2 - 2 1/2” screws as illustrated above.
24.
Position Door Header (78”long) with dado cut facing outwards between End Plates. Push walls
together so joints are tight together. Secure Header to Narrow Wall framing with 2 - 2 1/2” screws per
side.
Sits flush with inside
of wall framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
Make sure joints are
tight. Push walls in if
required.
Dado cut facing to the
top and outwards.