![background image](http://html.mh-extra.com/html/olt/8x12-spacemaker-garden-shed/8x12-spacemaker-garden-shed_assembly-manual_732311029.webp)
69.
Attach
Bottom Skirting
around the base of the shed.
Skirting will hide floor framing.
The front & rear skirting pieces
will meet together in the center.
Gaps on outside will be covered
by Wide Trim pieces later. Start
with side skirting and attach with
4 - 1 1/2” finishing nails per
piece. Attach additional 1 1/4”
screws on bottom edge of wall
siding into bottom wall plate to
further secure bottom siding to
framing. Drill pilot holes in siding
to prevent splitting.
3 pieces of Bottom Skirting for sides /
2 pieces for front and rear.
side
skirting
Gap in corner
1 1/4” screw
E. Misc.Section
70.
Attach
Corner
Trim Filler Strips
(4 - 1/2” x 2 1/2” x 75”)
to front and rear walls
in each corner.
Hammer with 8 - 1 1/2”
finishing nails.
bottom
skirting
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
68.
When ridge cap is correctly positioned, secure with 12 - 2” self tapping metal screws. Screw
into to final batten. Do not overtighten.
Important-
Illustrations show shed with Cedar
and Metal Roof Panels and assembly is
interchangeable.