![background image](http://html.mh-extra.com/html/olt/8x12-spacemaker-garden-shed/8x12-spacemaker-garden-shed_assembly-manual_732311025.webp)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25
56.
Attach
Side Facia Trim (71 3/4” long)
to end of rafters with 10 - 1 1/2” finishing nails per piece. Line
end of facia even with end of batten. Lower facia enough so as not to impede the roof when attached.
57.
Attach remaining side facia pieces as per
Step 56
. Make sure end of facia is even with end
of batten. This may cause a slight gap in the middle where pieces meet but will be covered later.
58.
Locate all
Metal Roof Panels ( 8 pcs x 39” wide x 58” long - Identical).
Starting with one side
(4 panels), place the first outside panel on rafters. Panel should overhang rafter/facia at the bottom
slightly and at top, not exceed the apex of the ridge boards.
even and
slightly lower