Olivetti OFX9700, Instruction Booklet

Page: 34 / 74

OFX 9700
- 28 -
6 - Parameters/Setup
Fax or PC reception
This menu, combined with a software program installed
on your PC will enable you to select the machine you wish
to receive the documents on:
• fax,
• PC,
• PC if available, fax otherwise.
244 - SETUP / RECEPTION / PC RECEPT.
For more details, please refer to PC Features
, page 42.
Received faxes reduction mode
This menu allows you to reduce received faxes for
printing. This adjustment can be automatic or manual.
Automatic mode :
This mode automatically resizes received faxes.
To set automatic mode :
246 - SETUP / RECEPTION / REDUCTION
1 Select Automatic and confirm with OK .
2 To exit this menu, press .
Manual mode :
The machine proposes a 70 to 100 % reduction. Outside
these values, the machine beeps for error. This fixed
reduction will be used when printing received documents,
regardless of the used paper format.
To set the manual mode :
246 - SETUP / RECEPTION / REDUCTION
1 Select FIXED and confirm with OK .
2 Enter the reduction value (between 70 and 100)
and confirm with
OK.
3 To exit this menu, press .
Technical Parameters
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1 Select the desired parameter and confirm with OK .
2 With the keys or , modify the parameter
settings by following the table below and press OK .
Parameter Signification
1 - Scanning mode Default value of the scan mode
resolution for the documents to be
transmitted.
2 - TX header If this parameter is on, your header
will appear on all documents sent
to your subscribers with your
name, number, date and number of
pages.
Warning: If you send a fax from
the document loader, the
transmission header will not
appear on the document your
correspondent receives.
3 - TX speed Transmission speed for outgoing
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
4 - Echo protect If this parameter is on, the on-line
echo will be reduced during long
distance calls.
6 - EPT mode
For some long distance calls
(satellite), the on-line echo may
disturb the call.
7 - COM. display Choice between transmission
speed displayed or number of the
page in progress.
8 - Eco energy Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
10 - RX header If this parameter is on, all
documents received by your fax
will include the subscriber’s header
with his name, number (if
available) fax print date and the
page number.
11 - RX speed Transmission speed for incoming
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
12 - Rings Number of rings to automatically
start your machine.