OFX 9700
- 18 -
4 - Fax
Fax
This chapter describes all the fax processing and
configuration functions.
You will also find a section describing fax mailboxes.
Fax transmission
Print a header page
A header page is stored in your terminal. To send your fax
using this header page, you can print it at any time and fill
in your details.
1
Select
30.
-
FAX/HEADER PAGE.
2
Select :
301 -
LOCAL
, to print a header page according to
the country configured on the terminal,
302 -
INTERNAT
, to print a bilingual header page,
the language of the country configured on the
terminal and English. The separator between the
two languages is "/".
Example of the international header page:
Immediate transmission
1
Place the document to be copied in the automatic
document feeder, face printed on the top.
2
Enter the fax number or choose your dialling mode
then press
.
The
icon flashes during the call phase, it stays
lit when both faxes are in communication.
3
At the end of transmission the initial screen is
displayed.
Delayed transmission
This function allows you to transmit a document at a later
time.
To program a postponed transmission you need to
identify the subscriber number, transmission time, feeder
type and number of pages.
To delay the transmission time of your document :
1
Place the document to be copied in the automatic
document feeder, face printed on the top.
2
Select
31 -
FAX / TRANSMISSION
.
3
Enter the subscriber number you wish to program
at a different time or choose your dialling mode and
confirm with
OK
.
4
Next to the current time, enter the new time and
confirm with
OK
.
5
Adjust the contrast and confirm with
OK
.
6
Select the feed type,
FEEDER
or
MEMORY
and
confirm with
OK.
7
You may enter the number of pages before
transmission and confirm with
OK
.
Your document is stored and will be sent at the new time.
Transmission with auto redial
This function allows you to monitor the dialling operation
during a fax transmission. In this case, the maximum
transmission rate will be 14400 bps.
This function allows for example:
•
to hear if the subscriber’s fax is engaged and if so,
choose the moment when the line is clear to start the
document transmission.
•
to control the communication progress in case of
uncertain numbers, etc.
To take the line manually:
1
Place the document in the fax feeder.
2
Press .
3
If necessary, set the sound level with navigator
or
keys.
If English is the language configured on the
terminal. The header page will only be printed
in English
.
When sending in "Deferred Send" mode,
make sure that the document is located in the
right direction.
Summary of Contents for OFX9700
Page 1: ...INSTRUCTION BOOKLET 555702en OFX 9700 GB...
Page 39: ...OFX 9700 33 7 Directory...
Page 73: ......
Page 74: ......
