18
In this reception mode, the behaviour of your fax ma-
chine depends on the caller, as shown in the follow-
ing diagram:
USING THE TELEPHONE CONNECTED TO THE
SAME LINE ...
If a telephone is connected to the same line to which
you have connected your fax machine, you can use
the fax to:
•
call a remote party using the rapid dialling pro-
cedures programmed on your fax machine see
"Programming speed dialling and one-touch
dial" and in particular "Calling with speed dial-
ling" and "Calling with one-touch dial".
•
interrupt temporarily a telephone conversation by
pressing the HOLD key. The conversation is re-
stored as soon as you press this key again.
•
transmit a document (see the following proce-
dure).
Transmitting a document by dialling the
number on the telephone ...
If this diagram is not enough:
è
è
è
START
read the following instructions:
If the end of the transmission, the fax beeps con-
tinuously, to switch off the beep
or
press the STOP key. In the first case, the fax ma-
chine interrupts the connection and returns to the
initial waiting mode, in the second case, it holds
the line so that you can talk with your remote party
or transmit another document.
The remote party who called listens to the prerecorded
message on the answering device
If a remote
party called
just to talk.
If a FAX MA-
CHINE called
If a remote
party called to
send a fax .
Your fax ma-
chine is auto-
matically set for
reception.
The remote
party leaves a
message after
the beep.
The remote
party presses
the transmis-
sion start key.
Your fax ma-
chine is auto-
matically set for
reception.
After the number of
rings of the answering device
