Olivetti d-Copia 5200MF Service Manual Download Page 95

Page: 95 / 502

2KR/2KS

1-3-58

U220

Setting the trial functions
Description

Sets the number of trial uses for optional functionality and the KSF-J application.

Purpose

To set the number of trial uses for optional functionality and the KSF-J application.

Method

1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.

Setting: [Option Function]

1. Select the item to be set.

2. Change the setting using the +/- keys.
3. Press the start key. The value is set.

Setting: [KSF-J Application]

1. Select the item to be set.

Only installed applications are displayed (up to 5).

2. Change the setting using the +/- keys.
3. Press the start key. The value is set.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U221

Setting the USB host lock function
Description

Specifies ON/OFF the USB host lock function. Setting this to ON causes the machine to be unable to recog-
nize the device connected to the USB host.

Purpose

Set according to the preference of the user.

Method

1. Press the start key.
2. Select the item.

Setting

1. Select [ON] or [OFF].

Initial setting: OFF

2. Press the start key. The setting is set.
3. Turn the main power switch off and on.

Maintenance

item No.

Description

Display

Description

Option Function

Number of trial uses for optional functionality

KSF-J Application

Number of trial uses for the KSF-J application

Display

Description

IC CARD

Number of trial uses for IC card functionality

COPY GUARD

Number of trial uses for the copy guard function

Display

Description

USB HOST LOCK

USB host lock function ON/OFF setting

Display

Description

USB host lock function ON

OFF

USB host lock function OFF

Service Manual Y111

960

Summary of Contents for d-Copia 5200MF






















































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 5200MF

Reviews:

Brands by name

Popular brands

Olivetti d-Copia 5200MF, Service Manual

Search results

Summary of Contents for d-Copia 5200MF

Reviews:

Brands by name

Popular brands