Olivetti d-Copia 5200MF, Service Manual

Page: 132 / 502

2KR/2KS
1-3-95
U510
Setting the enterprise mode
Description
Sets whether or not the enterprise mode setting is enabled.
This maintenance mode is effective for only 120 V specifications.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select [MODE1].
3. Select the item.
Initial setting: ON (Inch specifications)/OFF (Metric specifications)
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U901
Checking/clearing copy counts by paper feed locations
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the counts to be cleared.
CASETTE 3, CASETTE 4 and LCF cannot be cleared.
2. Select the counts for all and press [ALL CLEAR].
3. Press the start key. The counts is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON Enterprise mode setting is enabled
OFF Enterprise mode setting is disabled
INSTALL Executing the install
Display Description
MP TRAY MP tray
CASETTE 1 Cassette 1
CASETTE 2 Cassette 2
CASETTE 3 Cassette 3 (optional paper feeder)
CASETTE 4 Cassette 4 (optional paper feeder)
DUPLEX Duplex unit
LCF Optional 3000-sheet paper feeder
Y111960-2 Service Manual